After seeing these types of “grubby” jar candles on Pinterest for many years, I finally got around to trying them myself. Though it was a very long process, they came out so cute and perfectly primitive! There are many tutorials out there on grubby jars, but they are all pretty much the same: coffee grounds and white glue. You can do mason jars or any type of jar candle…it’s the perfect accent for any country or rustic home.
I started with this set of 12 small jar candles from Walmart. They cost around $6, so profitability on these should be pretty good.
I made up a mixture of about 2/3 coffee grounds to 1/3 cinnamon. Both can be bought at the dollar store for this project. I used matte Mod Podge, but now that it’s all said and done, I would probably use regular white glue because it’s a lot cheaper. I ended up using almost this whole jar on 12 little candles.
Paint on the glass jars with glue and roll in your coffee/cinnamon mixture.
Set them aside to dry. It takes a good 24 hours for them to dry thoroughly.
Once dry, gently tap them on the counter to get off any loose coffee/cinnamon grounds. Then apply another coat of glue to seal it. Be prepared…this part is messy! Don’t worry if more grounds come off because you can always do a second coat.
Set aside to dry again. Another 24 hours. Ugh…I hate waiting!
Here they are after they are dried. With just one coat, most of the surface was covered, but there were still a few spots where the glass showed through. I decided to do a second coating of the coffee/cinnamon. Looking back, I think I would just stick with one coat. They’re eventually going to be embellished with homespun fabric or burlap, which will cover up any thin areas. It’s up to you how many coats you do, based on the look you’re going for.
Another little tip: before you start, put a small piece of paper towel over the wax of your candle. Through the process, the cinnamon and coffee grounds fell onto the wax, and it doesn’t come off easy. The paper towel will keep the wax clean. I am going to have to wipe them off which is going to be a pain in the butt…lesson learned.
If you do decide to do a second coat, be prepared for even more of a mess. Repeat the process of painting them with glue, rolling in cinnamon, and finishing off with a finally coat of glue/Mod Podge to seal. Again, you have to wait 24 hours between each step. Don’t forget to touch up the top little rim of the jars.
Here they are after two coats and some embellishing. I think they came out so cute. I am planning on pricing them at about $3.00 per candle at my co-op.
Here are the some of the ways I decided to decorate them. A thin burlap strip topped with a vintage button:
Thin pieces of twine with rusty stars and hearts:
Plain ol’ twine and homespun fabric, wrapped around and knotted:
And a thin twine bow:
Have fun if you decide to give them a whirl. They are super easy, but be prepared for a long, messy process! I’d love to try this again with mason jars and maybe some larger jar candles. Have a great week and I hope be back soon! 😀