Witch Hats

I’ve been feeling particularly Halloweenie lately, given all the Fall goodness that is out in the craft stores. I picked up these paper mache witch hats for $1.oo each at Michael’s and, with a little spray paint and hot glue, converted them into primitive style witch hat decorations. I think they came out pretty cute!

DSC_0115

Here’s the blank canvas.

DSC_0100

First, I spray painted them black. All I had was glossy paint on hand. I usually like to use a matte finish for projects like this. After it dried I sanded it, to make it look a little worn and prim.

DSC_0102

Next, I mixed up some orange acrylic paint with water, to make a really thin orange paint, which works best for splattering. I then used the messy, yet effective “splatter technique,” which is using your fingers to pull back the bristles of the brush and let the paint splatter paint over your surface.

DSC_0101

After it dried like this, I sprayed it with a satin clear coat, mainly to disguise the half glossy/half sanded look. Next time, I’d probably used a matte black paint so that it doesn’t look so funky after sanding.

DSC_0103

While that dried, I made some little tags to decorate the hats with.

DSC_0105

I trimmed the tags to make them a bit smaller and stamped out the words “The witch is in.”

DSC_0108

Next, use some homespun around the base of the hat. I hot glued it in place like this.

DSC_0109

Then I tied some raffia around the base of the hat and also hot glued it down in a few places, but also leaving it loose and flowing.

DSC_0110

I finished them off with some large vintage buttons that I tied on with the tags. I also put a dab of hot glue under them as well, for extra hold.

DSC_0117

DSC_0120

Here they are all done. I am really pleased with them. They are heading over to my co-op today and I am thinking $14 each. I’ve never made anything like this before so not sure how they will sell. We’ll see!

DSC_0118

Happy Fall to all my craft friends out there!

A New Batch of Silicone Dipped Bulbs & Country Night Lights

It’s been a few years since I’ve made these country night lights with silicone dipped bulbs. In case you haven’t seen my old post on how to make them, here is a refresher! They are cheap to make and great items to sell at craft shows, or for your booth at a craft shop or co-op. For some reason they make me think of Fall, and I love to make them this time of year!

DSC_0130

First, get your night lights at the dollar store. I got these at The Dollar Tree. The bases come in all different colors. I tend to do mostly black and white, but this time I threw in a few blue and aqua ones.

DSC_0100

DSC_0105

Don’t mind my ugly carpet background…was crafting in the basement last night. Along with the night lights, I picked up these packages of extra bulbs. I like to make extra bulbs and sell them as replacements.

DSC_0114

For the bulbs to cure, you need to hang them immediately after dipping. I ran a piece of twine between two shelves and used clothespins to hold them in place.

DSC_0107

Your supplies for the bulbs consist of silicone, a little cup for dipping, cinnamon (optional) and a disposable stick to mix with. I add the cinnamon for a warm, primitive look. You can leave the silicone plain too. I use the basic Walmart brand of silicone. Some brands will work better than others – it’s all trial and error. I’ve had the best luck with this stuff. It seems to be just the right consistency.

DSC_0113

You also need one of these gun thingys, to squirt out the silicone. We happened to have one but they are available next to the silicone in Walmart.

DSC_0115

I ended up tossing my flimsy plastic cup and used a glass cup. It was easier to hold on to while dipping. I find that it works best to fill the cup up completely with the silicone mixture. Take the bulbs and dip them down in and turn them slightly to get the silicone to cover the base of the bulb. Then pull out quickly to create the long “tip”. This can be really challenging and takes some practice.

DSC_0119

You must work quickly because the silicone starts to cure and becomes more difficult to work with. Within 15-20 minutes, the silicone in your cup will probably be stiffer and less pliable. Hang them upside down with your clothespins and let them cure for at least 24 hours.

DSC_0120

When I was done with the bulbs, I worked on the bases. I tied on little strips of homespun fabric, finished with little rusty stars and hearts. For the hearts and stars, I just hot-glued them on. Don’t worry; the night lights to not get warm enough to melt the hot glue.

DSC_0121

Here they are all assembled!

DSC_0123

DSC_0124

I love the warm look you get from the cinnamon. Unfortunately they do not smell like cinnamon though.

DSC_0125

DSC_0132

For a display, I used an old cardboard box and covered the inside with scrapbooking paper. Punch holes through the cardboard with scissors for the little metal part to stick through.

DSC_0134

Don’t get discouraged if you try it and can’t get the bulbs to look right. The brand of the silicone makes a huge difference, and also practice makes perfect. I’ll sell these for probably $4.50 each at the co-op. Hope you have a great Labor Day! 🙂

More Magnets Made From Giant Buttons, Puzzle Pieces, and Birch Discs

After my penny rug magnets, I’m on a magnet kick! I can’t stop gluing magnets to things! Here are some of the pieces I’ve been using to make new magnets. I found these awesome giant wooden buttons at Michael’s for $1 per package. 🙂

DSC_0008

This bag of birch discs set me back only a few bucks at Michael’s.

DSC_0011

I love to pick up vintage wooden puzzles from the thrift store to make magnets out of. They come in all kinds of fun designs and shapes.

DSC_0017

First I decided to stamp the birch discs. For small objects like these, I like to lay the stamp down on it’s back and then press down the wooden piece right where I want it. That way I can see the design on the stamp and can line it up better.

DSC_0012

Next, glue on the magnets. Hot glue does not work well for this project; the bond is weak and the magnets pop right off. I use tacky craft glue for a strong hold.

DSC_0013

Here are the finished birch disc magnets. I love ’em!

DSC_0025

Here are the buttons…

DSC_0024

And the retro puzzle pieces.

DSC_0035

Lastly, I had a few miscellaneous pieces that I decided to make into magnets too. Some rusty stars that I added some twine bows to, and some rustic white shapes that I stamped.

DSC_0020

For some reason, magnets always sell really well. I plan on displaying them on some enamelware pots and pans up on the wall at my co-op. I will price them all between $1-$2. They also make great stocking stuffers come holiday time! What kinds of crafty supplies do you have lying around that you can turn into magnets?!?! 😀

“Penny Rug” Magnets

After a great day perusing my favorite antique/country shop, I was inspired to do a little crafting. I picked up a new penny rug table runner, and it got me thinking about how much I love the colors and patterns of penny rugs. I have never been able to sew, so I thought I’d try my hand at painting them!

DSC_0007

Here is my new runner that was the inspiration. I love this color combo!

DSC_0005

These are the wooden discs I used. They are the same ones I use for my snowman and pumpkin face pins & magnets. You can get them at any craft store.

DSC_0007

Paint them your base color. I used acrylics.

DSC_0014

Then paint in your rings of color! I winged it and painted the circles by hand, but a stencil would have been handy. I’m even thinking of trying it again using foam stamps.

DSC_0015

DSC_0016

The next step seems easy in theory, but was actually quite challenging. I’m talking about the little “stitches.” Here’s my trial and error photo. First I tried drawing them on with a paint pen (not pictured), but I can never get those stupid pens to work right. Then I tried painting them on with a fine tipped paint brush (left). Next, I tried drawing them on with a fine tipped Sharpie marker (middle). Lastly, I used a regular sized Sharpie marker (right). I decided to go with the latter. I like the thicker look of the stitches.

DSC_0018

The Sharpie works great at first, but as you continue to draw, the marker almost seems to run out. I think it’s because it doesn’t work well on the painted surface. You might need a couple Sharpies to make it through.

DSC_0019

After they dried, I glued small magnets on the back. Here they are all finished. I had a few casualties…some came out too messy and/or uneven. It’s going to take some practice I think. Overall I think they’re kinda cool.

DSC_0030

I am definitely going to make more of these after I perfect my technique. I have tons of enamel ware pots and pans hanging on the walls at my co-op, which work great as magnet displays. Go Google Penny Rugs right now and see all the beautiful color combinations out there! It’s so inspiring! 🙂

Adding a Primitive Fall Look to Boring Ol’ Candles

Sometimes things that I think are really cute, will sit in my booth for years, and won’t sell. For example, I bought some small candles years ago, that came in awesome faux white enamel tubs and had a real farmhouse look to them. Though they’re old, they still smell awesome and I am not giving up on them! I have since made them over a few times, and I am hoping my new Fall spin on them will help them move off the shelves. Here’s the new country look and the how-to!

DSC_0028

Originally I tried to sell them as is, for like $3 a piece. Good deal, so I thought, but no one wanted them! 😦 Then as Christmas time came around, I packed them up in plastic bags, tied them with homespun, and added a cute rustic tag, for gift giving. I sold a few, but still have about 6 left. Here’s the “before.”

DSC_0001

My first step in making them over was to “primify” them. I put the broiler on and CAREFULLY watched them for about 1 minute while the tops softened up and smoothed out. After years of sitting around, the wax gets little scratches and nicks, so this process makes them look brand new again. I then shook on some ground cinnamon and let them cool. It gives them a rustic, dusty look, and of course smells great too! Please don’t burn your house down doing this. Don’t leave them unattended and please, be careful people!!!

DSC_0002

My first thought was to tie the burlap over the top and tie off with some twine. I guess I was envisioning more of a cheesecloth look, where you could see and smell the candle better. This just looked dumb. LOL. It also covered my cute, newly dusted candle tops that look so perfectly primitive!

DSC_0007

Take two. I used a plate as a guide to trace out circles of burlap that would fold up around the tubs, from the bottom.  This idea would look great on small jar candles (such as those in short, fat mason jars), so don’t worry if you love the look but can’t find these exact candles! Any jar candle would work!

DSC_0010 DSC_0011

Put a ring of hot glue on the bottom of the jar candle and place on burlap. Then, using tiny dabs of hot glue, fold up the edges and create a taco-shell look. This will make it easier to tie on the twine.

DSC_0016 DSC_0017

Tie it around once or twice and add more dabs of hot glue to hold up your burlap. I also trimmed and frayed the edges of my burlap during this part.

DSC_0018

For a little accent, I took a sprig of pip berries I had lying around and pulled off two sprigs for each candle.

DSC_0008

I curled up the ends of the sprigs by wrapping them around a little paint brush handle. Then I tied them on using the excess twine and finished it off with a little bow.

DSC_0022

I think I will throw in a free mason jar tag with each candle since they’d made nice Fall gifts. I got these mason jar tags at Target…8 for $1! I love them!

DSC_0024

They have a cool “scarecrow” feel with the frayed burlap. They’d be nice for any primitive home decor but will be especially nice for Fall time I think.

DSC_0026

My helper Fred takes a little snooze while I clean up. What a bum!

DSC_0027

Like I said, this look would be easy to create on regular jar candles as well. The cinnamon dusting is a super easy way to make something look “prim” too! What are your thoughts on the finished project? Anything you’d do differently? 🙂

Primitive Grubby Jar Candles

After seeing these types of “grubby” jar candles on Pinterest for many years, I finally got around to trying them myself. Though it was a very long process, they came out so cute and perfectly primitive! There are many tutorials out there on grubby jars, but they are all pretty much the same: coffee grounds and white glue. You can do mason jars or any type of jar candle…it’s the perfect accent for any country or rustic home.

DSC_0534 2

I started with this set of 12 small jar candles from Walmart. They cost around $6, so profitability on these should be pretty good.

DSC_0534

I made up a mixture of about 2/3 coffee grounds to 1/3 cinnamon. Both can be bought at the dollar store for this project. I used matte Mod Podge, but now that it’s all said and done, I would probably use regular white glue because it’s a lot cheaper. I ended up using almost this whole jar on 12 little candles.

DSC_0536 2

Paint on the glass jars with glue and roll in your coffee/cinnamon mixture.

DSC_0538

DSC_0539

Set them aside to dry. It takes a good 24 hours for them to dry thoroughly.

DSC_0541 2

Once dry, gently tap them on the counter to get off any loose coffee/cinnamon grounds. Then apply another coat of glue to seal it. Be prepared…this part is messy! Don’t worry if more grounds come off because you can always do a second coat.

DSC_0530

Set aside to dry again. Another 24 hours. Ugh…I hate waiting!

DSC_0533

Here they are after they are dried. With just one coat, most of the surface was covered, but there were still a few spots where the glass showed through. I decided to do a second coating of the coffee/cinnamon. Looking back, I think I would just stick with one coat. They’re eventually going to be embellished with homespun fabric or burlap, which will cover up any thin areas. It’s up to you how many coats you do, based on the look you’re going for.

DSC_0535

Another little tip: before you start, put a small piece of paper towel over the wax of your candle. Through the process, the cinnamon and coffee grounds fell onto the wax, and it doesn’t come off easy. The paper towel will keep the wax clean. I am going to have to wipe them off which is going to be a pain in the butt…lesson learned.

DSC_0537

If you do decide to do a second coat, be prepared for even more of a mess. Repeat the process of painting them with glue, rolling in cinnamon, and finishing off with a finally coat of glue/Mod Podge to seal. Again, you have to wait 24 hours between each step. Don’t forget to touch up the top little rim of the jars.

DSC_0541

Here they are after two coats and some embellishing. I think they came out so cute. I am planning on pricing them at about $3.00 per candle at my co-op.

DSC_0540

Here are the some of the ways I decided to decorate them. A thin burlap strip topped with a vintage button:

DSC_0531

Thin pieces of twine with rusty stars and hearts:

DSC_0532

Plain ol’ twine and homespun fabric, wrapped around and knotted:

DSC_0534

And a thin twine bow:

DSC_0536

Have fun if you decide to give them a whirl. They are super easy, but be prepared for a long, messy process! I’d love to try this again with mason jars and maybe some larger jar candles. Have a great week and I hope be back soon! 😀

Reclaimed Wood Signs

So after many months of cold miserable winter weather and NO motivation whatsoever, I finally got around to doing a little crafty project this weekend. When inspiration strikes, you gotta run with it! The inspiration came from this old, weathered piece of wood that I found in the woods while walking the dogs. It’s chippy blue paint screamed country/primitive signage, so I broke out the foam stamps and went at it!

DSC_0412

First I had Greg cut them into strips. We have a big saw in the basement, but you can easily pick up a little electric hand saw from Lowes or Home Depot for $30 or so, and have it on hand for projects like this.

DSC_0415

I did a couple posts on foam stamps many moons ago, so here’s a little refresher. First, I laid out the letters of the word I wanted to stamp (the word is actually faced down; these stamps have letters on both sides) to get an idea of the spacing. I wanted to make sure the word would fit before I started.

DSC_0417

The most important thing I have learned when using foam stamps is do not ever dip the stamps directly into the paint. If you do, you’ll have way too much paint on the surface of the stamp. The minute you press down, it will overflow out the sides of the stamp and make uneven, messy letters. The best method I have found is to use a small piece of sponge and just dab on the paint onto the surface of the letter. Give it a couple of practice runs if need be. For this project, I used white acrylic paint.

DSC_0416

Go ahead and stamp out your word. Then, once dry, I applied some saw-tooth hangers on the back of each sign. These types of hangers are easy to use because you simply press them into the wood, but I hammered them down in for good measure.

DSC_0421

My last step was to spray them with a clear acrylic coat so the paint would not continue to chip off. The wood was really old and brittle and the paint was a bit loose, so I wanted to seal it in place.

DSC_0422

Here are the finished products, but I need your opinion. Should I add a coat of antiquing gel to tone down those bright white letters down a bit? I wasn’t sure if I should or not. They have kind of a “beachy” feel.

DSC_0428

I added a little star fish because I felt like it went with the cottage theme and filled up the space on the right that was a bit uneven from the space on the left. FYI those star fish are only $1 at AC Moore’s.

DSC_0429

So here they are. They are going over to my booth at the Carriage Place this week. I’ll probably price them around $7-$8 each. With “found” wood, it’s 99% profit, so no need to mark them up with a high price and let them sit in my booth for months!

DSC_0431

Part of my motivation also stemmed from an awesome estate sale that I went to on Saturday. I got tons and tons of great country/primitive themed items, including some nice antiques. This picture only shows a fraction of what I picked up there. It was half off everything so I literally loaded my car! It’s the first really great sale I’ve been to in a while, so this really got me excited! I love “pickin” season!!!

DSC_0424

Earlier in the week, I also got really lucky and picked up this old wooden butter churn……wait for it……off the side of the road!!! It’s amazing what some people throw away. I cleaned it up and now this cool piece will go to the co-op this week with the rest of the stuff from the sale.

DSC_0423

Well, let me know your thoughts on the signs. They are already really “distressed” looking, which is why I’m not sure on adding the antiquing gel. Have a great week and happy crafting!

Previous Older Entries