Chalk Painted Mason Jars

My latest crating venture has been painting mason jars. I’ve seen them all over Etsy and Pinterest and they are SO darn cute. I especially love the “ombre” jar sets. There are so many possibilities with different colors, sizes, stencils, themes, etc. After much trial and error, I’ve figured out that the type of paint you use is key! Here’s how I tackled this project.

DSC_0354

First, I gathered up some jars. I did a very small batch because I wanted to get the process down before I go nuts painting every jar in sight. LOL. 😀 I had a few quilted jars and also picked up these sets of mini jars at the Dollar Tree. I love the tiny size of them and think they’ll make cute “trinket jars.”

DSC_0330

For the newer packaged jars, I just started painting. For the previously used jars, I wiped them down with rubbing alcohol to ensure any dirt or oils were removed. A clean jar allows the paint to adhere to the glass better.

DSC_0335

The most important tip for this project: do NOT use regular acrylic paint. Even though many tutorials say it will work, I had a really hard time with getting the regular acrylic to stick to the glass. The first coat would go on streaky and the second coat would peel off the first coat, even after ample drying times. The best paint to use is chalk paint. I got the Craft Smart brand that is a chalky type of acrylic, which seemed to work well. I think the straight up chalk paint will work even better!

DSC_0341

I did the first coat with a soft paint brush and let it dry for 24 hours.

DSC_0338

Some might stop at one coat and be fine with that look, but for me it was a bit too transparent. I found the second coat has to go on quickly. The more brush strokes, the more likely you are to peel off some of the first coat. Overall they came out pretty good.

DSC_0347

I let them dry for another 24 hours. I then used some coarse sand paper to rough them up a little and create a worn, distressed look.

DSC_0349

Once sanded and wiped off with a towel (to get off the paint dust) I sprayed them with a clear sealer. Any clear poly will do. I used a satin spray and really liked the results.

DSC_0350

DSC_0351

Tied on a little twine bow and boom! Do you like them with or without the lids?

DSC_0353

DSC_0354

I love the quilted jars. The raised diamond pattern is pretty cute. I can envision one of these on my counter filled with a little bouquet of flowers. 🙂

DSC_0355

I experimented with using scraps of homespun fabric to accent the jars. I think I like the twine better.

DSC_0356

I think I shall make another big batch with more colors now that I have the process down. For now I’ll put these in my booth at the co-op and see if they move. I’m thinking I’ll price ’em at $2.50 for the small jars and $6.50-ish for the large jars. If you have any tips or tricks for this project, please leave a comment and share!!!

DSC_0357

While the mason jars were drying, I tinkered with another quick project. I found this wooden puzzle while I was perusing the thrift store, and you probably already know what I did with it!

DSC_0339

MAGNETS! I am obsessed with making magnets because they are easy and great sellers.

DSC_0340

I am always on the look out for cool wood puzzle pieces for just this reason. I love this theme!

DSC_0348

Happy crafting! 😀

More Magnets Made From Giant Buttons, Puzzle Pieces, and Birch Discs

After my penny rug magnets, I’m on a magnet kick! I can’t stop gluing magnets to things! Here are some of the pieces I’ve been using to make new magnets. I found these awesome giant wooden buttons at Michael’s for $1 per package. 🙂

DSC_0008

This bag of birch discs set me back only a few bucks at Michael’s.

DSC_0011

I love to pick up vintage wooden puzzles from the thrift store to make magnets out of. They come in all kinds of fun designs and shapes.

DSC_0017

First I decided to stamp the birch discs. For small objects like these, I like to lay the stamp down on it’s back and then press down the wooden piece right where I want it. That way I can see the design on the stamp and can line it up better.

DSC_0012

Next, glue on the magnets. Hot glue does not work well for this project; the bond is weak and the magnets pop right off. I use tacky craft glue for a strong hold.

DSC_0013

Here are the finished birch disc magnets. I love ’em!

DSC_0025

Here are the buttons…

DSC_0024

And the retro puzzle pieces.

DSC_0035

Lastly, I had a few miscellaneous pieces that I decided to make into magnets too. Some rusty stars that I added some twine bows to, and some rustic white shapes that I stamped.

DSC_0020

For some reason, magnets always sell really well. I plan on displaying them on some enamelware pots and pans up on the wall at my co-op. I will price them all between $1-$2. They also make great stocking stuffers come holiday time! What kinds of crafty supplies do you have lying around that you can turn into magnets?!?! 😀

“Penny Rug” Magnets

After a great day perusing my favorite antique/country shop, I was inspired to do a little crafting. I picked up a new penny rug table runner, and it got me thinking about how much I love the colors and patterns of penny rugs. I have never been able to sew, so I thought I’d try my hand at painting them!

DSC_0007

Here is my new runner that was the inspiration. I love this color combo!

DSC_0005

These are the wooden discs I used. They are the same ones I use for my snowman and pumpkin face pins & magnets. You can get them at any craft store.

DSC_0007

Paint them your base color. I used acrylics.

DSC_0014

Then paint in your rings of color! I winged it and painted the circles by hand, but a stencil would have been handy. I’m even thinking of trying it again using foam stamps.

DSC_0015

DSC_0016

The next step seems easy in theory, but was actually quite challenging. I’m talking about the little “stitches.” Here’s my trial and error photo. First I tried drawing them on with a paint pen (not pictured), but I can never get those stupid pens to work right. Then I tried painting them on with a fine tipped paint brush (left). Next, I tried drawing them on with a fine tipped Sharpie marker (middle). Lastly, I used a regular sized Sharpie marker (right). I decided to go with the latter. I like the thicker look of the stitches.

DSC_0018

The Sharpie works great at first, but as you continue to draw, the marker almost seems to run out. I think it’s because it doesn’t work well on the painted surface. You might need a couple Sharpies to make it through.

DSC_0019

After they dried, I glued small magnets on the back. Here they are all finished. I had a few casualties…some came out too messy and/or uneven. It’s going to take some practice I think. Overall I think they’re kinda cool.

DSC_0030

I am definitely going to make more of these after I perfect my technique. I have tons of enamel ware pots and pans hanging on the walls at my co-op, which work great as magnet displays. Go Google Penny Rugs right now and see all the beautiful color combinations out there! It’s so inspiring! 🙂

Stamped Wood Magnets

My latest project turned out to be really easy and fun, and I can’t wait to make more! These stamped wood magnets were made entirely out of items I had on hand, but all of the supplies necessary can be picked up at any craft store.

DSC_0534

First I picked out a bunch of stamps, including my dollar store letter stamps (in container) that I planned on stamping out words such as “live, laugh, love” or “simplify.” Spoiler alert – the “word” magnets didn’t come out good. I couldn’t get the spacing right, so I gave up.

DSC_0543

You’ll need basic black ink pads, or whatever color you choose!

DSC_0544

You’ll also need magnets (Walmart), craft glue or E6000, and wooden discs (Michael’s). These are the same discs I like to use for snowman face magnets at Christmas time. These are also the perfect size to make pins, using metal pin backs that are usually found in the jewelry section of the craft store.

DSC_0546

I wanted to make the wood a little more old and worn, so I used a simple paint wash to darken them down a bit. I mixed a little bit of brown acrylic paint with water, so it was really thin.

DSC_0548

Paint the discs and blot off the excess with a paper towel. They only took about a half hour to dry. You can repeat this step a few times to get your desired result.

DSC_0549

The picture does not do them justice…they look darker in person! They could have gone even darker, but I was impatient and wanted to get stampin! hehe 🙂

DSC_0550

Some stamped designs look better than others. These are some of my favorites!

DSC_0553

DSC_0554

Using your craft glue, apply the magnets. I find hot glue doesn’t work as good on these discs. I don’t want them falling apart, so that’s why I went with the regular craft glue. It takes a lot longer to dry, but it’s way stronger.

DSC_0551

And here they are. You could take this project in so many directions!

DSC_0561

I will be back soon; I have some “grubby” candles in the works. They are in the drying phase and I hope to do the next coat and finishing touches early this week! Woohoo! 😀